|
|
09-27-2008, 12:25 PM | #1 |
Avalon Senior Member
Join Date: Sep 2008
Posts: 16
|
Colloidial Silver Do it Yourself
If anyone is interested, here's a supreme article by Peter Lindemann (a man I trust). Didn't see this in any threads, thought it might be useful in case of an epidemic.
Distilled water 30V DC current Pure silver (try 99.999% silver speaker wire... got mine on eBay) http://www.elixa.com/silver/lindmn.htm Thank all of you for participating in this journey. Cheers. |
09-27-2008, 01:01 PM | #2 |
Avalon Senior Member
Join Date: Sep 2008
Posts: 16
|
Re: Colloidial Silver Do it Yourself
Silver source ($4.50/foot) should last a loooong time.
http://cgi.ebay.com/99-999-5n-Pure-S...d=p3911.c0.m14 You might want to read the whole article, but here's an exerpt: Making Your Own The simplest way to control these factors is to make the colloidal silver for yourself. By doing this, you will not know exactly what is there unless you do laboratory testing, but you will have a pretty good idea. Without laboratory testing of commercial products, you don't know much more, because the quality control batch to batch is loose with most brands. Also, by making it yourself, you will end up with real "colloidal" silver, which is the product referred to in most of the literature. If you are already making your own colloidal silver, please pay special attention to this section because much of the information you now have may be incorrect. The simplest way to make real colloidal silver at home is by the "low voltage electrolysis" method. A few batteries may be connected to some silver electrodes and placed in a glass of water. This process will cause small particles of silver to be sintered off the electrodes and enter the water. This deceptively simple method is very easy to do WRONG, and most people who are making colloidal silver at home are making an inferior product. It's In The Water When you do this yourself, it is very important to control the purity of the water, because the purity of the water is one of the factors that controls how small the particles of silver will be. Only high quality DISTILLED water should be used. You cannot use purified or filtered water because it still has too many dissolved minerals in it. You cannot use deionized water because it doesn't conduct electricity well enough to start the reaction. Distilled water is just perfect to start the reaction slowly and let it proceed properly. Another variable that influences particle size is the water temperature. The warmer the water, the faster the reaction will take place, and the smaller the particles will be. The Best Is Yet To Come The very best voltage for the reaction is 30 volts, because the electrodes run the cleanest at this voltage. If you have a small power supply, set it for 30 volts. If you are running on batteries, it is best to start at 36 volts (three 12 volt batteries or four 9 volt batteries) and let the batteries drain down from there. Holding the silver electrodes at a uniform distance away from each other yields a better product. When 30 volts is applied across silver electrodes held uniformly apart in distilled water, a totally different event happens. First, the reaction proceeds very slowly. Often, for the first 15 minutes nothing seems to be happening. Then finally, a faint yellow mist will begin to form. Within a few minutes, the reaction will speed up, but the particles produced will be a golden-yellow as viewed with a flashlight. Using this method, 8 ounces of distilled water at room temperature can be made into a 3-5 ppm colloidal silver preparation in 20-25 minutes. Made this way, colloidal silver can cost under 10¢/oz to make. Electron microscope photographs of this product show a silver particle size in the range .001 to .004 microns. During manufacturing, the particle cloud is a golden-yellow. These particles will hang in the water at the level they are produced, and for the most part, will not fall to the bottom of the glass. This is what a "colloidal" preparation of silver looks like. After the particles disperse, the water will look clear again, but may turn a light yellow if the concentration is high enough and after the particles have become evenly dispersed. |
09-27-2008, 05:26 PM | #3 |
Avalon Senior Member
Join Date: Sep 2008
Location: Central, IL
Posts: 395
|
Re: Colloidial Silver Do it Yourself
One downside to this is if you take alot over a long period of time, you turn blue like a Smurf! Ladies and Gentlemen, the real life Papa Smurf! http://today.msnbc.msn.com/id/22536241/
Bill "the Doctor" |
09-27-2008, 05:33 PM | #4 |
Guest
Posts: n/a
|
Re: Colloidial Silver Do it Yourself
That guy said he has turned blue from rubbing it on his skin daily for years. I for one, have drank colloidal silver when I felt like I was near death with stomach viruses and felt better within 15 minutes. I also wouldn't doubt with such a great remedy for anything that the media would do anything to scare people away from it.. That blue guy succcccks and has scared away everyone I know from wanting to drink colloidal silver.
|
09-10-2009, 05:31 PM | #5 | |
Avalon Senior Member
Join Date: Sep 2008
Location: Minnesota
Posts: 2,482
|
Re: Colloidial Silver Do it Yourself
Quote:
Im not blue or grey and I have been using it for over two years. so thats all BS Just make sure you use clean water Anyhow, if I do change colors, I will still be ME |
|
09-10-2009, 08:06 PM | #6 |
Avalon Senior Member
Join Date: Oct 2008
Posts: 104
|
Re: Colloidial Silver Do it Yourself
Here is my system and all the components anyone needs to make one
the system complete image #1 the 2nd image showing the power supply and I'll explain my choice of voltage in stating that the smaller the voltage the smaller the colloids and better quality the solution.. it does however take more time. (12 hours for a 9ppm solution) but much less chance of an ionized solution ..I want silver colloids , not ions. 3rd image is a close-up of the cap modifications .. it's just a plastic mason jar lid with two holes for the silver rods (99.9999) and one in the center for the aerator hose that keeps the solution mixing during the process.. I show a battery type but one can use one from a aquarium setup.. not absolutely needed, but does at to the quality and size of colloids. hopefully the images will help folks that would like to make their own .. just remember the higher the voltage the larger the colloids and closer to ionization one gets.. I'll try to find the article that I read before making this one setup... but anyhow, the smaller the colloid the better the solution can be used by the body. the lower voltage (well under 9v DC) the better and the aeration improves it even further.. Last edited by twoRone; 09-10-2009 at 08:10 PM. |
09-10-2009, 09:14 PM | #7 |
Avalon Senior Member
Join Date: Sep 2008
Location: UK
Posts: 660
|
Re: Colloidial Silver Do it Yourself
This looks familiar! I used a bigger jar and bought a specialist device.
http://www.projectavalon.net/forum/s...9&postcount=44 |
09-10-2009, 11:38 PM | #8 |
Avalon Senior Member
Join Date: Sep 2008
Location: Minnesota
Posts: 2,482
|
Re: Colloidial Silver Do it Yourself
Thanks for the great tips.
I love colloidal and cant begin to tell you all the ways that I have used it and I use it everyday |
10-12-2009, 11:24 AM | #9 |
Avalon Senior Member
Join Date: Sep 2008
Location: Sydney, NSW, Australia
Posts: 2,280
|
Re: Colloidial Silver Do it Yourself
I'd like to report a success with colloidal silver. I make my own, 8-9 ppm. (See earlier in the thread). I have not taken any internally yet - no reason to - but I do use it as a mouthwash, for an underarm deodorant and now I have just finished treating an outbreak of athletes foot!
I don't know why I get that - I am definately no longer an athlete Anyway the CS poured on the area and rubbed gently in the morning and evening killed it within 3 days and completely cleared up in 5 and now on the way to healing fully. I use about 10ml at a time for that sometimes 20ml. A.. Last edited by Anchor; 10-12-2009 at 09:22 PM. Reason: Cant spell |
10-12-2009, 09:20 PM | #10 |
I dont need a label !
Join Date: Sep 2008
Location: The Shire of Wilt
Posts: 2,889
|
Re: Colloidial Silver Do it Yourself
Why don't you drink it?
Would be good to build up inside you to protect you from getting a bug rather than waiting till you do |
10-12-2009, 09:24 PM | #11 |
Avalon Senior Member
Join Date: Sep 2008
Location: Sydney, NSW, Australia
Posts: 2,280
|
Re: Colloidial Silver Do it Yourself
I don't drink it because I am currently healthy ( I think ).
I also have a lot of faith in my immune system. A.. |
10-12-2009, 09:27 PM | #12 |
Avalon Senior Member
Join Date: Sep 2008
Location: Minnesota
Posts: 2,482
|
Re: Colloidial Silver Do it Yourself
not just athelete foot..............it will clear up psoriasis by simply rubbing it on the infected area. Takes away the sting and itchiness ASAP
it will work on your scalp and stop itching immediately. My husband uses it after he shaves. There is nothing that this will NOT clear up. I love it and I will drink some if I eat something I know is not good for me. Like chips, salsa etc its only mineral water, no harm will come to you, it will keep your system clean |
11-14-2009, 06:47 AM | #13 | |
Avalon Senior Member
Join Date: Sep 2008
Posts: 128
|
Re: Colloidial Silver Do it Yourself
How To Make Your Own Ultra-Portable Colloidal Silver Generator
Quote:
http://www.ken-welch.com/Commentary/Silver1.html |
|
02-13-2010, 04:28 PM | #14 |
Avalon Senior Member
Join Date: Jan 2010
Posts: 38
|
Re: Colloidial Silver Do it Yourself
Thank you DiVineEnvy for that link on Do it Yourself. I was looking at various units priced from $40 to $250 and thought that it can't be that complicated. All of the units work on the same process as used for plating metal or removing plating from metal. That link you provided is the way to go. All the rest is just marketing.
It also reminds of those "foot baths" that suppose to remove toxins from your body. You sit there with your feet in the clear water. After a while the water turns to brown and then a very blackish-brown. When I learned the special box had steel plates with a current running through it, it became apparent that it color was only rust. |
09-27-2008, 05:54 PM | #15 |
Avalon Senior Member
Join Date: Sep 2008
Location: Brookston, Indiana
Posts: 4
|
Re: Colloidial Silver Do it Yourself
Hello,
I use two stacks of 3 9-volt batteries with distilled water. Works well. A couple observations and questions: The distance between the electrodes suspended in the water has an influence on the speed of the reaction. Do you know of an optimum distance? I use two stacks of 3 because one stack of 3 seemed to take a long time. This indicates that the reaction is current dependent as well as voltage. Any idea what the best current is? RASE |
09-27-2008, 09:09 PM | #16 |
Avalon Senior Member
Join Date: Sep 2008
Location: Chelmsford, Essex
Posts: 650
|
Re: Colloidial Silver Do it Yourself
The blue skin is from having silver salts which happens from not using pure distilled water, from what I've read. I have a SOTA silver pulser which blood zaps and silver makes and I'm not blue.
Also 1 person who is blue with 1000's usin it suggest to me maybe disinformation... I have read it is good for MRSA and that silver threads are being used in the fabrics by the NHS to counter MRSA. http://www.worldwidewounds.com/2004/...Dressings.html http://news.bbc.co.uk/1/hi/england/london/6334505.stm http://ezinearticles.com/?Does-Collo...ns?&id=1005919 Of course would the powers that be that have vast somes invested in the pharma industry want this being widely known that the best anti-bacteria agent can be made with two wires and 4 9v batteries? http://www.all-natural.com/silver-1.html and wikipedia's view http://en.wikipedia.org/wiki/Colloidal_silver |
09-29-2008, 03:24 AM | #17 |
Avalon Senior Member
Join Date: Sep 2008
Posts: 99
|
Re: Colloidial Silver Do it Yourself
I generally agree with the method being described in this thread. It is very close to what I have doing for the last 10 years.
It is very important that the purest distilled water be used. Never use water that has chlorides in it. If you have doubt, you can test the water with a sample kit you can buy at any swimming pool store (or Walmart) for testing chlorine levels in pool water. I agree with heating the water. I personally microwave my distilled water for three minutes to make the water as hot and energized as possible. In my own setup, I have been using 56VDC from a six battery configuration. I do this with the intention of giving my liberated nanoparticles an extra energy boost from the electric field to hopefully rip apart some of the liberated nanoparticles so that some of them turn into monoatomic, super deformed, high spin ORME state atoms. I also make sure that I do my electrolysis in the dark. I want my silver particles to be as energized as possible. If I've made it correctly, it will have a sweet flavor, similar to caramel. If it has no ORME state atoms, then it tastes metallic. The key is make sure the solution is not made in a lighted environment. If it is exposed to the sunlight, the ORME state atoms flash out. The other thing I do is filter my solution before putting into a dark blue glass bottle for storage in a dark closet. When doing the electrolysis, black silver oxide will form a feathery looking build up on one of the electrodes. The other electrode will turn brown. You will also see tiny bubbles of oxygen and hydrogen leaving the electrodes as the distilled water is split. This will become more and more obvious as more ions disperse into the water and allow more current to conduct between the electrodes. There will be a lot of large particles and "floaties" in the water. Make sure you filter all that stuff out, so only the tiniest particles of the good stuff remains in your glass storage bottle. I always filter my silver solution with SEVERAL layers of coffee filter. I want only the very smallest of the nanoparticles and monoatomic silver remaining in my solution. Always before doing your electrolysis, scrape your electrodes clean with a greeny pad. This will remove that thin silver oxide layer that builds up over time from the silver wire being exposed to air. You want all oxide gone so that only raw pure silver is exposed to your distilled water. I usually limit my electrolysis between 10 and 15 minutes. After that, I remove the silver wire and then filter the solution. I usually filter twice before I put the solution into my blue glass bottle. By the way, I'm still using the same silver wire I originally bought in 1998. They are about six inches long and I would guess are about AWG 14 in size (2 square mm). I hope these small tidbits of detail from my own experience are helpful. Regards, Merkhava Last edited by Merkhava; 09-29-2008 at 03:49 AM. |
10-09-2008, 03:02 PM | #18 | |
Avalon Senior Member
Join Date: Sep 2008
Location: SCOTLAND
Posts: 121
|
Re: Colloidial Silver Do it Yourself
Quote:
Hi there sir I really hope you don’t mind my request could you would you possibly be interested in doing a walk through from materials to setup to procedure to end product of your method of colloidal silver production. This I believe is very important to everyone here and I personally would so appreciate your expertise and help. After reading all your posts on this subject you seem more than qualified for such a task. As I’ve said I would so much appreciate your time and effort and help Thank you My love Rab |
|
10-10-2008, 12:34 AM | #19 |
Retired Avalon Member
Join Date: Sep 2008
Location: Where there is light
Posts: 138
|
Re: Colloidial Silver Do it Yourself
Dr Robert Beck produced some information concerning Colloidal Silver and making your own, and this info along with other protocols for blood cleansing are shown here.
The information page on making your own Colloidal Silver is at this page. I have been making my own for some time now, and use a simple setup using pure Silver electrodes which can be purchased very cheaply from Silver Well at just A$20.00 pair of electrodes "9999+ Silver 18cm Straight Electrodes........$20 a pair For simple home-made D.I.Y. generators or some other brands of generators. (Not suitable for use in Silver Well generators.) Straight 7" (18cm) 12 gauge .9999 silver electrodes for $20 a pair. This is top quality wire, thicker than the 14 guage wire you'll usually get elsewhere. Postage for electrode sets is FREE in Australia, NZ, and Pacific. When ordering electrodes use your normal postage address." See Here. Hope this info helps, there is a lot of info out there on the net about it, and no you WILL NOT TURN BLUE with Colloidal Silver. |
10-10-2008, 01:32 PM | #20 |
Avalon Senior Member
Join Date: Sep 2008
Location: London, UK
Posts: 159
|
Re: Colloidial Silver Do it Yourself
This is an excellent thread, thank you for all of the information.
I was just doing some general research on colloidal silver and saw a website that is selling it seperately but also with added ingredients - does anyone know about benefits/disadvantages of CS with argentum/MSM? http://www.colloidalsilveronline.co....-3for2-msm.htm |
10-10-2008, 02:28 PM | #21 |
Avalon Senior Member
Join Date: Sep 2008
Location: Chelmsford, Essex
Posts: 650
|
Re: Colloidial Silver Do it Yourself
The SOTA guy and Dr Beck were in discussions if you watch the movie.
The other benefit with investing in pure Silver is that it is a healing metal rather than a 'war' metal as it can be used to make healing pure bars for collidial silver makers |
10-10-2008, 11:39 PM | #22 |
Avalon Senior Member
Join Date: Sep 2008
Location: SCOTLAND
Posts: 121
|
Re: Colloidial Silver Do it Yourself
The help and info on this thread will save lives blessed are you all
Thank you and my love to you all Rab |
10-14-2008, 05:05 AM | #23 |
Avalon Senior Member
Join Date: Sep 2008
Posts: 35
|
Re: Colloidial Silver Do it Yourself
just a quick thought:
the old hindu gods had blue skin, didnt they? do you think that may have been from high doses of collodial silver? come to think of it, maybe thats the miracle behind the "smurfs" phenomenon as well..... |
10-15-2008, 02:31 AM | #24 |
Avalon Senior Member
Join Date: Sep 2008
Location: near Rockford, IL
Posts: 57
|
Re: Colloidial Silver Do it Yourself
Here is a great book on Colloidal Silver: COLLOIDAL SILVER by Mark Metcalf.
Gives the history, medical value and how-to-make. Try going to www.amazon.com for a book purchase... get it used and save cash. Greg222 PS If you wish to purchase the colloid directly, I recommend SUPER SILVER SOLUTION. It is a slightly different process for its manufacture, it doesn't oxidize when exposed to light quite so quickly, so it's great for your pet's water bowl. |
10-15-2008, 03:24 AM | #25 | |
Retired Avalon Member
Join Date: Sep 2008
Location: Where there is light
Posts: 138
|
Re: Colloidial Silver Do it Yourself
Quote:
Colloidal Silver will NOT make you turn blue Ionic silver will if taken in large enough quantities. Where do you think royalty and the other "Blue Bloods" got their name from, they consumed ionic/metallic silver from the silver cutlery and Silver plates they used, which gave them high doses that the "common man" did not get........... |
|
Tags |
colloidal silver |
|
|