Colloidial Silver Do it Yourself

[Connecting with Sauce]

The blue skin is from having silver salts which happens from not using pure distilled water, from what I've read. I have a SOTA silver pulser which blood zaps and silver makes and I'm not blue.

Also 1 person who is blue with 1000's usin it suggest to me maybe disinformation... I have read it is good for MRSA and that silver threads are being used in the fabrics by the NHS to counter MRSA.

http://www.worldwidewounds.com/2004/...Dressings.html

http://news.bbc.co.uk/1/hi/england/london/6334505.stm

http://ezinearticles.com/?Does-Collo...ns?&id=1005919

Of course would the powers that be that have vast somes invested in the pharma industry want this being widely known that the best anti-bacteria agent can be made with two wires and 4 9v batteries?

http://www.all-natural.com/silver-1.html

and wikipedia's view

http://en.wikipedia.org/wiki/Colloidal_silver

[Merkhava]

I generally agree with the method being described in this thread. It is very close to what I have doing for the last 10 years.

It is very important that the purest distilled water be used. Never use water that has chlorides in it. If you have doubt, you can test the water with a sample kit you can buy at any swimming pool store (or Walmart) for testing chlorine levels in pool water.

I agree with heating the water. I personally microwave my distilled water for three minutes to make the water as hot and energized as possible.

In my own setup, I have been using 56VDC from a six battery configuration. I do this with the intention of giving my liberated nanoparticles an extra energy boost from the electric field to hopefully rip apart some of the liberated nanoparticles so that some of them turn into monoatomic, super deformed, high spin ORME state atoms.

I also make sure that I do my electrolysis in the dark. I want my silver particles to be as energized as possible. If I've made it correctly, it will have a sweet flavor, similar to caramel. If it has no ORME state atoms, then it tastes metallic. The key is make sure the solution is not made in a lighted environment. If it is exposed to the sunlight, the ORME state atoms flash out.

The other thing I do is filter my solution before putting into a dark blue glass bottle for storage in a dark closet. When doing the electrolysis, black silver oxide will form a feathery looking build up on one of the electrodes. The other electrode will turn brown. You will also see tiny bubbles of oxygen and hydrogen leaving the electrodes as the distilled water is split. This will become more and more obvious as more ions disperse into the water and allow more current to conduct between the electrodes.

There will be a lot of large particles and "floaties" in the water. Make sure you filter all that stuff out, so only the tiniest particles of the good stuff remains in your glass storage bottle. I always filter my silver solution with SEVERAL layers of coffee filter. I want only the very smallest of the nanoparticles and monoatomic silver remaining in my solution.

Always before doing your electrolysis, scrape your electrodes clean with a greeny pad. This will remove that thin silver oxide layer that builds up over time from the silver wire being exposed to air. You want all oxide gone so that only raw pure silver is exposed to your distilled water.

I usually limit my electrolysis between 10 and 15 minutes. After that, I remove the silver wire and then filter the solution. I usually filter twice before I put the solution into my blue glass bottle.

By the way, I'm still using the same silver wire I originally bought in 1998. They are about six inches long and I would guess are about AWG 14 in size (2 square mm).

I hope these small tidbits of detail from my own experience are helpful.

Regards,
Merkhava

[firstfruit]

Originally Posted by Merkhava

I generally agree with the method being described in this thread. It is very close to what I have doing for the last 10 years.

It is very important that the purest distilled water be used. Never use water that has chlorides in it. If you have doubt, you can test the water with a sample kit you can buy at any swimming pool store (or Walmart) for testing chlorine levels in pool water.

I agree with heating the water. I personally microwave my distilled water for three minutes to make the water as hot and energized as possible.

In my own setup, I have been using 56VDC from a six battery configuration. I do this with the intention of giving my liberated nanoparticles an extra energy boost from the electric field to hopefully rip apart some of the liberated nanoparticles so that some of them turn into monoatomic, super deformed, high spin ORME state atoms.

I also make sure that I do my electrolysis in the dark. I want my silver particles to be as energized as possible. If I've made it correctly, it will have a sweet flavor, similar to caramel. If it has no ORME state atoms, then it tastes metallic. The key is make sure the solution is not made in a lighted environment. If it is exposed to the sunlight, the ORME state atoms flash out.

The other thing I do is filter my solution before putting into a dark blue glass bottle for storage in a dark closet. When doing the electrolysis, black silver oxide will form a feathery looking build up on one of the electrodes. The other electrode will turn brown. You will also see tiny bubbles of oxygen and hydrogen leaving the electrodes as the distilled water is split. This will become more and more obvious as more ions disperse into the water and allow more current to conduct between the electrodes.

There will be a lot of large particles and "floaties" in the water. Make sure you filter all that stuff out, so only the tiniest particles of the good stuff remains in your glass storage bottle. I always filter my silver solution with SEVERAL layers of coffee filter. I want only the very smallest of the nanoparticles and monoatomic silver remaining in my solution.

Always before doing your electrolysis, scrape your electrodes clean with a greeny pad. This will remove that thin silver oxide layer that builds up over time from the silver wire being exposed to air. You want all oxide gone so that only raw pure silver is exposed to your distilled water.

I usually limit my electrolysis between 10 and 15 minutes. After that, I remove the silver wire and then filter the solution. I usually filter twice before I put the solution into my blue glass bottle.

By the way, I'm still using the same silver wire I originally bought in 1998. They are about six inches long and I would guess are about AWG 14 in size (2 square mm).

I hope these small tidbits of detail from my own experience are helpful.

Regards,
Merkhava

Hi there sir

I really hope you don’t mind my request could you would you possibly be interested in doing a walk through from materials to setup to procedure to end product of your method of colloidal silver production.

This I believe is very important to everyone here and I personally would so appreciate your expertise and help.

After reading all your posts on this subject you seem more than qualified for such a task.

As I’ve said I would so much appreciate your time and effort and help

Thank you

My love

Rab

[Tez]

Dr Robert Beck produced some information concerning Colloidal Silver and making your own, and this info along with other protocols for blood cleansing are shown here.

The information page on making your own Colloidal Silver is at this page.

I have been making my own for some time now, and use a simple setup using pure Silver electrodes which can be purchased very cheaply from Silver Well at just A$20.00 pair of electrodes

"9999+ Silver 18cm Straight Electrodes........$20 a pair
For simple home-made D.I.Y. generators or some other brands of generators. (Not suitable for use in Silver Well generators.) Straight 7" (18cm) 12 gauge .9999 silver electrodes for $20 a pair. This is top quality wire, thicker than the 14 guage wire you'll usually get elsewhere.
Postage for electrode sets is FREE in Australia, NZ, and Pacific. When ordering electrodes use your normal postage address." See Here.


Hope this info helps, there is a lot of info out there on the net about it, and no you WILL NOT TURN BLUE with Colloidal Silver.

[She-Ra]

This is an excellent thread, thank you for all of the information.

I was just doing some general research on colloidal silver and saw a website that is selling it seperately but also with added ingredients - does anyone know about benefits/disadvantages of CS with argentum/MSM?

http://www.colloidalsilveronline.co....-3for2-msm.htm

[Connecting with Sauce]

The SOTA guy and Dr Beck were in discussions if you watch the movie.

The other benefit with investing in pure Silver is that it is a healing metal rather than a 'war' metal as it can be used to make healing pure bars for collidial silver makers

[firstfruit]

The help and info on this thread will save lives blessed are you all

Thank you and my love to you all

Rab

[argonacon]

just a quick thought:

the old hindu gods had blue skin, didnt they? do you think that may have been from high doses of collodial silver?

come to think of it, maybe thats the miracle behind the "smurfs" phenomenon as well.....

[Greg222]

Here is a great book on Colloidal Silver: COLLOIDAL SILVER by Mark Metcalf.
Gives the history, medical value and how-to-make.
Try going to www.amazon.com for a book purchase... get it used and save cash.

Greg222

PS
If you wish to purchase the colloid directly, I recommend SUPER SILVER SOLUTION. It is a slightly different process for its manufacture, it doesn't oxidize when exposed to light quite so quickly, so it's great for your pet's water bowl.

[Tez]

Originally Posted by argonacon

just a quick thought:

the old hindu gods had blue skin, didnt they? do you think that may have been from high doses of collodial silver?

come to think of it, maybe thats the miracle behind the "smurfs" phenomenon as well.....

Note:
Colloidal Silver will NOT make you turn blue

Ionic silver will if taken in large enough quantities.
Where do you think royalty and the other "Blue Bloods" got their name from, they consumed ionic/metallic silver from the silver cutlery and Silver plates they used, which gave them high doses that the "common man" did not get...........

[Peace2all]

Originally Posted by Tez

Dr Robert Beck produced some information concerning Colloidal Silver and making your own, and this info along with other protocols for blood cleansing are shown here.

The information page on making your own Colloidal Silver is at this page.

I have been making my own for some time now, and use a simple setup using pure Silver electrodes which can be purchased very cheaply from Silver Well at just A$20.00 pair of electrodes

"9999+ Silver 18cm Straight Electrodes........$20 a pair
For simple home-made D.I.Y. generators or some other brands of generators. (Not suitable for use in Silver Well generators.) Straight 7" (18cm) 12 gauge .9999 silver electrodes for $20 a pair. This is top quality wire, thicker than the 14 guage wire you'll usually get elsewhere.
Postage for electrode sets is FREE in Australia, NZ, and Pacific. When ordering electrodes use your normal postage address." See Here.


Hope this info helps, there is a lot of info out there on the net about it, and no you WILL NOT TURN BLUE with Colloidal Silver.

Hi Tez, I clicked on link for the Silver Well Generator and it was $199 I was probably looking at wrong one. Basically wanting to make our own for large family. I read the post about charging 30v etc. so would I go to Bunnings and ask for ???? Any tips and prices for generator would be great. Thanks Mate!

[Ampgod]

I make and drink my own silver all the time.
You won't turn blue!
I use a silver maker that I bought from
http://shop.toolsforhealing.com/
Goto the BOB BECK TAB.
I also buy the .9999 silver wires there as well.
I use distilled water, slightly warmed in a cup that is glass.
I turn it on and set timer for 40 minutes.
I have mine run at 1.5 milli Amps (lowest , finest setting)
When done, you stir it a tiny bit and drink it all.
Yes it tastes like butt! hahahaha but it works!

I have not been sick since.
I have tested it on my wife when her throat started hurting and it cured her with one dose over night. She was back to work next day.


This stuff is really great!

Peace,
Ampgod

[Tez]

Originally Posted by Peace2all

Hi Tez, I clicked on link for the Silver Well Generator and it was $199 I was probably looking at wrong one. Basically wanting to make our own for large family. I read the post about charging 30v etc. so would I go to Bunnings and ask for ???? Any tips and prices for generator would be great. Thanks Mate!

I found that the best and easiest way was to buy a pair of .99999 pure silver electrodes, as mentioned previously (from Silver Well), i use one x 9 volt battery (you can use up to 3 all snapped together by their treminals) with a battery snap connector, and on the end of the wires of the connector i attached miniature alligator clips which i attach to the silver electrodes which are suspended (spaced 30 mm apart) in the 250 ml glass of water (make sure they don't touch) and leave for about 5 mins at normal room temperature.

This was my first method, prior to making up a unit that utilised a 600 ml straight sided glass jar (Fowlers Vacola Jar).
I later purchased a relatively cheap TDS metre (Total dissolved Solids Metre) so i could monitor the strength of the Co;;oidal Silver solution being made, and could make whatever strength i wished consistently.

I would advise anyone wanting to make their own to watch the Beck Video on the site i had mentioned, and to read up on all they can, it will make it so much easier for you.

I had noticed some-one else used quite a few 9V batteries in their setup, but i have stayed away from that as i had read that too high current is likely to produce ionic silver rather than colloidal silver.

Tez