Go Back   Old Project Avalon Forum (ARCHIVE) > Project Avalon Forum > Project Avalon > Preparations / Advice

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-11-2010, 09:37 PM   #1
Ammit
Avalon Senior Member
 
Join Date: Nov 2008
Location: Weymouth, Dorset, UK
Posts: 827
Default Faraday Cages (Build it!!)

Sorry if this has been done already, but I feel that we need more insight into building these items to atleast try and protect any equipment we may need in the event of an emp of any sort or even nuclear waves.

What I have found out so far is:
It does need to be grounded
Mesh is not needed as just covering a box with aluminium foil would do the job
A filing cabinet would work great ( apparently ), as long as all items as with any faraday cage are sat on a non conductive material
If you choose to use mesh for your faraday cage, then the mesh holes need to be correct for the wavelength you are trying to block, Wavelength = rate of travel(300,000,000 m/s) divided by the frequency
No, Microwave ovens will not work as I have tested mine
If you want to test your faraday cage, use a radio tuned to fm, VHF spectrum (30-300 MHz). If you cannot recieve radio across this band then you have done all you can and are supposedly protected.

Can anyone add to this? or even correct anything I have researched.

Ammit

Last edited by Ammit; 01-11-2010 at 10:03 PM.
Ammit is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:55 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Project Avalon